GSP Double End Units

The barrel of the GSP Hub is designed to fit securely on the pilot of our wheel. This ensures that the weight of the load is carried on the barrel of the hub and not on the lugs of the hub. We recommend the use of hub dust caps to provide more protection against water, dirt, and debris. GSP Hubs are made with a deeper seat for the dust cap. This keeps the cap secure and in place. GSP Hubs fit all Clyde, FAST (WASP), and Lewellyn equipment and can be specified on new equipment.


Part Number Description Bolt Pattern Bolt Size Other Characteristics Component Parts
4-1050-02-02 Rear FAST Hub 5 on 4 1/2" 2.495" with inner and outer grease seal;
1" washer
Click Here
4-1050-02-03 Front FAST Hub 5 on 4 1/2" 2.495" with inner and outer grease seal;
3/4" washer
Click Here
4-1050-02-03-C Front and Rear Hub 5 on 4 1/2" 2.495" with inner and outer grease seal;
3/4" washer
Click Here
4-1050-02-05 Front and Rear Clyde Hub 5 on 4 1/2" 2.495" with dust cap and inner seal Click Here
4-155-04-01 155 Hub 5 on 4 1/2" 2.780" 1.25" inner and outer bearings;
straight shaft
Click Here
4-1050-02-10 Rear FAST Hub Boxed 5 on 4 1/2" 2.495" 1" washer; inner and outer seal;
no nuts; same as 4-1050-02-02
Click Here
4-1050-02-13 Front FAST Hub Boxed 5 on 4 1/2" 2.495" with 3/4" washer, inner and
outer seal; no nuts; same as
4-1050-02-03
Click Here

 

Hub Component Parts
Part Number Bearing Seal Cup Washer Studs Stud Nuts Dust Cap
4-1050-02-02 In: L68149 In: SL-173 In: L68111 SW-1000 ST-502-04 STN-506 N/A
Out: L44649 Out: SL-123 Out: L44610
4-1050-02-03 In: L68149 In: SL-173 In: L68111 SW-750 ST-502-04 STN-506 N/A
Out: L44649 Out: SL-123 Out: L44610
4-1050-02-05 In: L68149 In: SL-173 In: L68111 SW1000 ST-502-04 STN-506 1505-1
Out: L44649 Out: L44610
4-155-04-01 In: LM67048 In: SL-150 In: LM67010 N/A ST-502-04 STN-506 1601
Out: LM67048 Out: LM67010
4-1050-02-10 In: L68149 In: SL-173 In: L68111 SW-1000 ST-502-04 STN-506 N/A
Out: L44649 Out: SL-123 Out: L44610
4-1050-02-13 In: L68149 In: SL-173 In: L68111 SW-750 ST-502-04 STN-506 N/A
Out: L44649 Out: SL-123 Out: L44610
**4-1050-02-03-C has the same component parts as 4-1050-02-03, except it has a dust cap instead of an outer seal.
 

Contact Us

Send us a quick message using the form below.